SPECIFIC TESTS OR
PROPERTIES MEASURED
特定測試或量度的特性
|
SPECIFICATION, STANDARD METHOD
OR TECHNIQUE USED
規範、標準方法或應用技術
|
|
Non-combustibility Test for Building Products
|
BS 476 : Part 4 : 1970 (AMD 2483 and 4390)
|
|
建築材料不燃性試驗
|
EN ISO 1182 : 2002
|
|
|
GB/T 5464-1999
|
|
Method for assessing the heat emission from building materials
|
BS 476-11：1982
|
|
Determination of the heat of combustion
|
EN ISO 1716:2002
|
|
建築材料及製品的燃燒性能燃燒熱值的測定
|
GB/T 14402-2007
|
|
Ignitability of building products subjected to direct impingement of flame – Single-flame source test
|
EN ISO 11925-2:2002
|
|
建築材料可燃性試驗方法
|
GB/T 8626-2007
|
|
Response to ignition by a small flame – Edge ignition
|
DIN 53438 Part 2: June 1984
|
|
Response to ignition by a small flame – Surface ignition
|
DIN 53438 Part 3: June 1984
|
|
Determination of the burning behaviour using a radiant heat source
|
EN ISO 9239-1:2002
|
|
鋪地材料燃燒性能測定 -
輻射熱源法
|
GB/T 11785-2005
|
|
Fire tests for flame propagation of textiles and films
|
NFPA 701-2004(Test method 1 & 2)
|
|
Tests for flammability of plastic materials – Horizontal burning test
|
ANSI/UL 94-2006, clause 7
|
|
Fire hazard testing – test flames – 50W horizontal and vertical flame test methods – Horizontal burning test
|
IEC 60695-11-10:1999+A1:2003, clause 8
|
|
塑膠 –
燃燒性能的測定-水平法
|
GB/T 2408-2008, clause 8
|
|
Rate of burning and/or extent and time of burning of plastics in a horizontal position
|
ASTM D 635-06
|
|
Tests for flammability of plastic materials –50W (20mm) vertical burning test
|
ANSI/UL 94-2006, clause 8
|
|
Fire hazard testing – test flames – 50W horizontal and vertical flame test methods – Vertical burning test
|
IEC 60695-11-10:1999+A1:2003, clause 9
|
|
塑膠 –
燃燒性能的測定-垂直法
|
GB/T 2408-2008, clause 9
|
|
Measuring the comparative burning
|
ASTM D 3801-06
|
|
characteristics of solid plastics in a vertical position
|
|
|
Tests for flammability of plastic materials –500W (125mm) vertical burning test
|
ANSI/UL 94-2006, clause 9
|
|
Fire hazard testing – test flames – 500W flame test methods
|
IEC 60695-11-20:1999+A1:2003
|
|
Measuring the comparative burning characteristics and resistance to burn-through of solid plastics using a 125-mm flame
|
ASTM D 5048-03
|
|
Tests for flammability of plastic materials –Thin material vertical burning test
|
ANSI/UL 94-2006, clause 11
|
|
Determining the flammability characteristics of nonrigid solid plastics
|
ASTM D 4804-03
|
|
Tests for flammability of plastic materials –Horizontal burning foamed material test
|
ANSI/UL 94-2006, clause 12
|
|
Cellular plastics - Determination of horizontal burning characteristics of small specimens subjected to a small flame
|
ISO 9772:2001+A1:2003
|
|
泡沫塑料燃燒性能試驗方法 –水平燃燒法
|
GB/T 8332-2008
|
|
Horizontal burning characteristics of cellular polymeric materials
|
ASTM D 4986-03
|